Twister-milling-nozzle
The twister-milling-nozzle is Cleantecs’ universal drain pipe cleaning nozzle suitable for canals with a pipe diameter of 25-60mm, which are most common in indoor applications.
Using the integrated rotor nozzle, the twister-milling-nozzle mills through the obstruction in the pipe and propels itself forward through the obstruction with rotor jets at the same time, flushing out the remains of the dissolved contaminants. The pipe wall is also cleaned from further debris. The vibrations generated by the cleaning head significantly facilitate the fast penetration of the twister-milling-nozzle in bends. So far, several work steps and types of nozzles were required for cleaning. As a further benefit, good cleaning results are already achieved at water flow rates starting from 7 l/min.
Field of application / intended use: universal cleaning of drain pipes indoors (from obstructions and during maintenance cleaning
Twister-milling-nozzle 25
| Pressure max. | 150 bar |
| Spray angle | 20° |
| Temperature max. | 40 °C |
| Bearing | Ceramic |
| Nozzle | Ceramic |
| Nozzle-size (table) | 040 and 060 |
| Flow rate max. | 30 l/min |
| Length / Diameter | 36 mm / Ø 25 mm |
| Weight | 0,05 kg |
| Connection | G 1/8" IG |
| Item number nozzle 040 |
99.21020.25-040 |
| Item number nozzle 060 | 99.21020.25-060 |
Twister-milling-nozzle 30
| Pressure max. | 150 bar |
| Spray angle | 20° |
| Temperature max. | 40 °C |
| Bearing | Ceramic |
| Nozzle | Ceramic |
| Nozzle-size (table) | 040 and 060 |
| Flow rate max. | 30 l/min |
| Length / Diameter | 36 mm / Ø 25 mm |
| Weight | 0,05 kg |
| Connection | G 1/8" IG |
| Item number nozzle 040 |
99.21020.30-040 |
| Item number nozzle 060 | 99.21020.30-060 |
Twister-milling-nozzle 35
| Pressure max. | 150 bar |
| Spray angle | 20° |
| Temperature max. | 40 °C |
| Bearing | Ceramic |
| Nozzle | Ceramic |
| Nozzle-size (table) | 040 and 060 |
| Flow rate max. | 30 l/min |
| Length / Diameter | 48 mm / Ø 35 mm |
| Weight | 0,1 kg |
| Connection | G 1/8" IG |
| Item number nozzle 040 |
99.21020.35-040 |
| Item number nozzle 060 | 99.21020.35-060 |
Submit an enquiry
Would you like to get some advice?
Give up a call!
Tel. +49730792650
To submit an enquiry, please use our form.
Characteristic
Feed jet + rotor jet
Universal pipe cleaning nozzle from Cleantecs with extremely high cleaning power with minimal water requirements. With back nozzles which ensure that contaminants are flushed out.
Video
Repair kits
Repair kit - Twister-milling-nozzle 25
| Pressure max. | 150 bar |
| Spray angle | 20° |
| Temperature max. | 90 °C |
| Bearing | Ceramic |
| Nozzle | Ceramic |
| Nozzle-size (table) | 020 and 060 |
| Weight | 0,1 kg |
| Item number nozzle 040 |
66.21020.25-040 |
| Item number nozzle 060 | 66.21020.25-060 |
Repair kit - Twister-milling-nozzle 30
| Pressure max. | 150 bar |
| Spray angle | 20° |
| Temperature max. | 90 °C |
| Bearing | Ceramic |
| Nozzle | Ceramic |
| Nozzle-size (table) | 020 and 060 |
| Weight | 0,1 kg |
| Item number nozzle 040 |
66.21030.25-040 |
| Item number nozzle 060 | 66.21030.25-060 |
Repair kit - Twister-milling-nozzle 35
| Pressure max. | 150 bar |
| Spray angle | 20° |
| Temperature max. | 90 °C |
| Bearing | Ceramic |
| Nozzle | Ceramic |
| Nozzle-size (table) | 020 and 060 |
| Weight | 0,1 kg |
| Item number nozzle 040 |
66.21035.25-040 |
| Item number nozzle 060 | 66.21035.25-060 |
+497307976060